Random good picture Not show

1. Compound machine tools, rapid prototyping, printing (ex. Embossing), etc.

2. In order to shorten the development cycle, the rapid prototyping technique, including the computer simulation, the hardware-in-loop simulation and the road test, was suggested.

3. A method used between Volution CT and Rapid Prototyping is expounded and proved in this article.

4. Rapid Prototyping Material in forming temperature can be parting, slowly forming materials should die with forced cooling and heating measures.

5. The Rapid prototyping technique is a new technique , which produced along with development of the computer CAD/CAM technique.

6. This rapid prototyping method, preparation of punch is simple, easy to change, shape, high efficiency, low cost, suitable for large-scale production.

7. According to the demand of TIG welding Rapid Prototyping metal fabric experiments, The TIG weld parameters open loop control system is executed.

8. Aiming at the characteristic of the welding rapid prototyping, a whole hatching and scanning algorithm of the complex section area is presented in the paper .

9. This thesis mainly used the literature research and rapid prototyping method.

10. The CAD technology in micromachine rapid prototyping system is presented. The design of the slicing software for micromachine rapid prototyping system is discussed in detail.

11. A method of rapid prototyping manufacturing using electrostatic attraction is a new rapid prototyping method.

12. Objective To evaluate rapid prototyping technique in the diagnosis and treatment of complicated pelvic fractures.

13. Rapid Prototyping provides a new method of aiding to diagnose. A hollow three dimension model with complicated conicoid surface was built and the prototyping processing was analyzed.

14. Objective Depending on rapid prototyping technique, an individual titanium frame based on 3D solid model was using to reconstruct the jaw.

15. A new concave polygon convex decomposition algorithm for rapid prototyping subarea scanning was proposed.

16. Rapid prototyping manufacturing in the ice pattern is actualized through FDM and separate ejection.

17. Selective laser sintering ( SLS ) is one of the most attentive rapid prototyping techniques due power materials.

18. It is necessary to triangulate the point cloud in reverse engineering and rapid prototyping.

19. The situation of mould manufacturing for inlet manifold in rapid prototyping and investment casting was introduced.

20. Objective To explore a new method of fabricating attachment bonded to impacted tooth using rapid prototyping.

21. Applying a photopolymer resin instead of thermopolymer resin as a bonding material, a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

22. The thesis also makes a comparison between such modeling and rapid prototyping method, analyzes the advantages and disadvantages of both, puts forward a new vision of the system modeling process.

23. The photomask auto-correction method can enhance the ability of automation in area-forming rapid prototyping system and reduce efficiently negative influence of human error.

24. This paper is aimed to design innovative atomizer box based on human - machine engineering and Rapid Prototyping.

25. The new individualized metal implant is based on reverse engineering and rapid prototyping technique, and has solved the problems of long period manufactural procedure in the traditional technique.

26. After analysis of causes of the warpage distortion of parts in rapid prototyping, a novel tool-path planning, parallel raster scanning and filling path planning, is presented.

26. Wish you can benefit from our online sentence dictionary and make progress every day!

27. The prototypes of the new designs were fabricated by rapid prototyping technique and assembled for user evaluation.

28. Abstract:Objective To develop a new system of computer-aided design(CAD) for individual metacarpophalangeal joint prosthesis based on rapid prototyping technique.

29. Objective To investigate a method for the functional reconstruction of discontinuous mandible using reverse engineering(RE) and rapid prototyping technique(RP).

30. To reduce the size error and to advance surface quality is an important aim for Rapid Prototyping.